Wednesday, April 20, 2016

How To Apply Pearl Nano Coatings - A Step by Step Guide To Pearl Nano Installers

How to Apply Body Coating - Green Bottle
Notes Before Applying:
Please Note: THIS IS A PROFESSIONAL PRODUCT, MADE FOR PROFESSIONALS. Only apply Pearl Nano Coatings to vehicles that have been perfectly polished and is free of any and all scratches, marring or imperfections. Please follow the directions listed here + suggested wipe-down wait times.
– Do not apply under the scorching sun, in the rain, or sub-zero temps.
– Apply only after the auto body has cooled completely.
– Apply by hand.
– Remove any dirt attached to the car body.
– Make sure the car body is dry.

1. Clean Car, Remove surface contaminants and iron particles in the paint using a clay bar.
2. Remove all Scratches and Polish to perfection.
3. Remove any oils left behind from polishing compounds

Only Now Are You Ready To Apply The Coatings
1. Pay attention, use great lighting and use the guidelines set here.
2. Place 5-10 drops of Pearl AutoBody coating on the sponge (this should cover about half a car door).
3. Apply to the car body 1 square part by 1 square part at a time. Apply the coating evenly is very important. Everyone has a different method. We recommend going in a small circle, then in a starburst pattern and then lengthwise direction and then breadthwise. Do this 1-2 times or until you see that the portion you are covering has an even amount of coating applied to it.
4. After applying, wait for allotted time: When the room temperature is:
a. 10 degrees C (50F),: wait 4 minutes,
b. 20 degrees C, (68F) wait 2-3minutes,
c. 20+ degrees C, (70F+) wait 1-2 minutes
Hotter than 25C or 85F wait 20-30 seconds.
Once the timeframe has past, use a DRY microfiber towel to polish it into a high gloss. The best time to wipe the surface is when you feel a little resistance. If the temperature is very hot, (90F+) you may want to use an initial damp microfiber towel to remove and then a dry one.
5. Do not wait too long time after application to wipe and dry as indication in Step 4, otherwise, when the Pearl AutoBody coating is hardened fully, it is very hard to remove.
If you wait too long and it dries super hard…do not panic. Polish it down using a course cutting polish and a machine polisher.

Please Note: THIS IS A PROFESSIONAL PRODUCT, MADE FOR PROFESSIONALS. Only apply Pearl Nano Coatings to vehicles that have been perfectly polished and free of all scratches, marring or imperfections. Please follow the directions listed here and suggested wipe down wait times.
Key points:
1. USE Lots of Lights. The room light should be strong enough, to make sure each part is wiped by towel timely.
2. For big parts like the engine hood, you should divide the area into several small squares to apply the coating. Look into the glare to see if you missed any areas.
3. Do not add water any more water to the foam sponge once you start coating the body.
4. Wipe the coating immediately if it adheres to the glass. It not meant to be used on the glass.
5. You should not use the same application sponge or surface of towel to wipe the entire time; you need to change applicators and the wipe down towel often.

The Pearl AutoBody Pro Coating Can be applied 30 minutes after the Base coat is applied, unless the temperature is below 50F with high humidity. Then wait 1-2 hours to apply the Pro Coat.

The Pearl AutoBody Pro Coating
How to apply Pearl Nano Pro Auto Body coating: Blue Bottle

Notes Before Applying:
Please use the same guidelines as the base coat.
1. Pay attention, use great lighting and use the guidelines set here.
2. Place 5-6 drops of Pearl Nano Pro AutoBody coating on the sponge (this should cover about a 2’x2’ area or 3’x3’ area).
3. We recommend going in a small circle, a starburst pattern and then in a lengthwise direction and then breadthwise. Do this 1-2 times or until you see that the portion you are covering has an even amount of coating applied to it.
4. IMPORTANT - After applying, wait for about 1-2 minutes. (if 60F to 80F) Because the surface is much slicker than the base coat was on the paint. This is thinner and dries faster. Please be sure you understand this. This is where new installers make mistakes.
Once the timeframe has past, use a DRY microfiber towel to polish it into a high gloss. Use a 2nd clean towel to buff again.
DO NOT PUSH VERY HARD. Move to next section.
5. Do not wait too long time after application to wipe and dry as indication in Step 4, otherwise, when the Pearl AutoBody coating is hardened fully, it is very hard to remove.
Key points:
You should not use the same application sponge or surface of towel to wipe many cars; You need to change applicators and the wipe down towel often. If it begins to dry and harden, it can scratch the surface.

Pearl Nano HD: RED BOTTLE
You should use 5-7-drops per section of car, truck or boat. Less is more.
The Pearl Nano HD can be applied in 50F to 100F, but not in the sun.
The coating thickness, water repellency, and gloss will be increased by a second application and/ or the Pearl AutoBody Pro Coat.
By coating the HD + the pro coat, it creates an amazing 3D effect.
1. Pay attention, use great lighting and use the guidelines set here.
2. Place 5-7 drops of Pearl HD Marine/ Wheel coating on the sponge (this should cover about half a car door).
3. Apply to the car body 1 square part by 1 square part at a time. Apply the coating evenly is very important. Everyone has a different method. We recommend going in a small circle, then in a starburst pattern and then lengthwise direction and then breadthwise. Do this 1-2 times or until you see that the portion you are covering has an even amount of coating applied to it.
4. After applying, wait for alotted time: When the room temperature is:
a. 10 degrees C (50F),: wait 3 minutes,
b. 20 degrees C, (68F) wait 2minutes,
c. 20+ degrees C, (70F+) wait 1-2 minutes
Hotter than 25C or 85F wait 20-30 seconds.
Once the timeframe has past, use a DRY microfiber towel to polish it into a high gloss. The best time to wipe the surface is when you feel a little resistance. If the temperature is very hot, (90F+) you may want to use an initial damp microfiber towel to remove and then a dry one.
If the boat remains in the water, you have the option to wipe the coating on and leaving it, without buffing it off. Only below the waterline. Above the waterline you should buff into a shine.
5. Do not wait too long time after application to wipe and dry as indication in Step 4, otherwise, when the Pearl Nano HD coating is hardened fully, it is very hard to remove.
If you wait too long and it dries super hard…do not panic. Polish it down using a course cutting polish and a machine polisher.
Please Note: This is a professional product, made for professionals. Only apply Pearl Nano Coatings to vehicles that have been perfectly polished and free of all scratches, marring or imperfections. Please follow the directions listed here and suggested wipe down wait times.
Key points:
Parts that may be coated:
1. Urethane parts
2. Alloy Wheels
3. Front Light
4. Tail lens
5. Plated parts
Parts that cannot be coated:
• Windscreen and Glass

Notes Of Pearl Autobody Coating After Application:
1. Car washing: Wash car by hand. The use of Pearl Professional Waterless Car Wash is most recommended.
2. Wax: You Do Not need to wax your car or use a sealant any more. The Pearl AutoBody coating performance may be impaired if you wax the car.
3. Do not take a coated vehicle through a bristle brush automatic car wash.
4. If the sand or mud is attached to the body, remove by washing using high-pressure washer or hose.
5. If bird droppings or tree sap is attached, remove it as soon as possible.
6. Do not let the tap water on the body dry-itself because the chlorine contained in tap water, will potentially leave watermarks on the car body.
5. The coated surface will be hard enough to drive home is 3-4 hours and be fully hardened/ cured within 3 days.
6. Do not let water touch the coating for 24 hours after application.
7. Wait one week to wash the car after application

Maintain the car afterwards with care. Pearl Professional Waterless Car Wash is a perfect product to use. Even washing with high quality soap and water is ok. Do not let the soap dry nor the hard water.
The better you treat the car and the exterior, the longer the coating will last.
Remove bird droppings and other contaminants quickly.
Pearl Nano Glass Coating: Black Bottle


1. Clean glass very well. The coating only bonds with clean glass.
2. Spray on the Pearl Glass Prep + Primer spray.
3. Wipe window with microfiber towel.
4. Drop 5-7 drops of the Pearl Nano Glass (black bottle) onto the microfiber sponge and the window glass.
5. Wipe the entire window with the 
microfiber sponge

Dries clear and lasts for years.

Maintain the car afterwards with care. Pearl Professional Waterless Car Wash is a perfect product to use. Even washing with high quality soap and water is ok. Do not let the soap dry nor the hard water.
The better you treat the car and the exterior, the longer the coating will last.

Remove bird droppings and other contaminants quickly

Watch Actual Video on Pearl Nano Coatings Application:

HOW TO CLEAN A CAR WITHOUT TOUCHING IT.

PEARL NANO COATING INSTRUCTIONS

PEARL POST SALE - WHAT TO SAY AFTER THE COATING IS INSTALLED


HOW TO MARKET PEARL NANO COATING INSTALLATION 




Super-Hydrophobic Nanotechnology – Scratch Resistant Nano Coatings-For-Cars – Boats – Buses – Motorcycles – Windshields – Countertops – Sinks –Tile – Paint – Plastic – Glass – Metal – Chrome – Porcelain – Aluminum
Super-Hydrophobic, Scratch Resistant Nanotechnology Coatings?


The Super-Hydrophobic, Super Glossy, Scratch Resistant Pearl Nano Coatings are apart of a highly advanced nano-coating system, which was created to address the growing surface protection needs of the automotive, marine, aerospace and home markets. It is extremely resistant to corrosion, abrasion and temperature, while providing an incredible level of surface gloss! These coatings have been tested in the harshest conditions and proven to perform better than what we describe. With that said…it is important that you be the final judge on its performance.

Pearl’s Auto Body 
and Marine Coatings can be applied to metal, plastic, powder coat, paint, and virtually any hard substrate, forming a permanent protective barrier. Pearl Nano Coatings react with the substrate surfaces and form an “abrasion resistant” coating with extremely high bonding properties. It also generates a thin, optically transparent coating, with high impact strength. This very durable and “hard” coating is also flexible.
Pearl Nano Coating Features:
· Permanent Protection
· Anti-dust and Anti-static, plus Anti-icing and Snow Capabilities
· Anti-bacterial and Anti-mildew
· Graffiti-Proof
· Weather and UV Resistant
· Super Hydrophobic & Hydrophilic
· 100% Colourless and Optically Clear Nano-coating
· Excellent Scratch Resistance & High Abrasion Resistance – Greater than 9H
· Surface Applications: Metal, Marble, Granite, Glass, Plastic, Porcelain, Painted Surfaces, Ceramic & More!
· Thermal Resistant (Higher than 300F)
· High Gloss, Non-toxic, Environmentally-Friendly

PEARL NANO OFFERS DEALERSHIP AND DISTRIBUTOR

WE ARE CONNECTING WITH PEOPLE WHO ARE:
Professional Auto, Boat or Aircraft Detailers.
· Buyers/ Investors/ Wholesalers or International Importers.
· Building a New Business using Ceramic/ Nano Coatings.
· Adding Coatings to their list of Detailing Services.
· Entrepreneurs who want the best Products to Sell & Promote.
· Professional Commercial Cleaners and Building Maintainers.
Location:
—Pearl Nano Coatings is located in the Seattle area.
We offer Pearl Nano Coatings, Waterless Car Wash and Luxury Detailing Products For Sale at Retail and Wholesale.
Pearl Distributor and Private Label Options Available.
Pearl Products are Super High Performance, No Hassles, No Pressure, No Mess, No Problem!
How to Become International Distributor/Installer?
— Contact Us:
— Tel: 866 285-1051 Toll free
E-mail: Dave [@] PearlUSA.net
Pearl USA Inquires: The Pearl USA Website
International Inquires: The Pearl International Website
— Ask about a Sample Pack and Price List
Good News: We private label for other companies and can also private label for you as well. We provide custom-designed labels, boxes, applicators and branding that you can call your own. Low minimums and great prices. Visit @http://www.PearlNano.com

Auto Detail/ Paint Correction

Marine Detail/ Polishing

Hydrophobic Glass Coating

Water Repellent Application

Ceramic Nano Coatings

Coatings for the Home

0 comments:

Post a Comment

Search This Blog

Followers